GPON
9.10
I-010G-B standards compliance
I-010G-B indoor ONTs are compliant with the following standards:
•
802.1p mapper service profile on the upstream
•
G.984 support for GPON interface (framing)
•
G.984.3 support for activation with automatic discovery of a serial number and a
password
•
G984.4 (standard and revised) support for OMCI interface for ONT management
and provisioning
9.11
I-010G-B special considerations
The following special considerations should be observed.
Upgrade considerations and limitations
Existing ONTs that use 7342 ISAM FTTU releases older than R04.06.xx and
R04.07.xx must be upgraded to use R04.00.10 software while assigned to a PON ID
value smaller than 64. For this purpose, if split ratios larger than 1:64 are being
deployed, you may choose to set aside the first PON ID as a staging point.
I-010G-B ONT considerations and limitations
Table
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
3FE 54199 AAAA TCZZA
Figure 9-4 Single-residence Gigabit Ethernet ONT
Optical
block
9-10
lists the considerations and limitations for these ONTs.
Edition 01 ONT Product Information Guide
Power Converter
Ethernet (1)
Ethernet (1)
SOC
Ethernet (1)
Ethernet (1)
March 2011
9 — I-010G-B unit data sheet
Power connector
RJ-45
RJ-45
RJ-45
RJ-45
20391
9-9