NTP 103 — Install an I-010G-A indoor
Purpose
This NTP provides the steps to install the I-010G-A indoor ONT at the subscriber
residence.
Prerequisite
Ethernet cables must be installed at the subscriber residence.
Parts
Table
indoor ONT.
Part
AC/DC power converter
Mounting screws (for wall
mounting the ONT)
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
3FE 54199 AAAA TCZZA
ONT
NTP 103-1
describes the hardware parts that are required to install an I-010G-A
Table NTP 103-1: Hardware parts required for ONT installation
Description
The power converter converts ac power to 12 V dc power.
Two screws are required with the following features:
•
pan head style of screw head
•
screw size of M4 or #6
These screws are not supplied by Alcatel-Lucent.
Edition 01 ONT Product Information Guide
March 2011
NTP 103-1