Alcatel-Lucent 7330 Product Information Manual page 243

Parameter Description
allow_unmatched_n This parameter governs behavior
otify to allow a NOTIFY with full dialog
headers (indicating that they are
part of a dialog) to be accepted by
the ONT that does not match a
known SUBSCRIBE dialog. The
contents of such an unmatched
NOTIFY will be ignored. The
default is "no", meaning that a
NOTIFY with full dialog headers
must match a known SUBSCRIBE
dialog or a 481 error will result. If
the parameter is set to yes, the
contents of such an unmatched
NOTIFY will be ignored.
This parameter should not be set
to "yes" if implicit NOTIFY
messages are expected from the
softswitch (for example, no
SUBSCRIBE is performed).
For other devices, the value is no
and cannot be changed.
rfc2833_symmetric This parameter governs the SDP
offer/answer processing related to
the payload type to use with
RFC2833. If this parameter is set to
"yes", then it means that the same
payload types will be used for both
send and receive RFC2833 packets.
The payload type to be used will be
based on the SDP offer or answer
from the ONT. If this parameter is
set to "no" then the payload types
to be used for send and receive
RFC2833 packets are set according
to the rules in RFC3264 section 5.
If this parameter is set to
"far_end_symmetry", the same
payload type will be sent for both
send and receive RFC2833 packets.
The payload type to be used will be
based on the SDP offer or answer
received from the far end of the
call. The default is "no"
(11 of 23)
Alcatel-Lucent 7330/7302 ISAM FTTN R04.02.42a
3FE 54199 AAAA TCZZA Edition 01 ONT Product Information Guide
Mode Mode Device
1 2
Y Y Package
A, B, H
only
Y Y All
March 2011
5 — VoIP overview
OMCIv2 TL1 or CLI
support? parameters
No, value is N/A
derived
from
FTP/default
line profile.
No, value is N/A
derived
from
FTP/default
line profile.
5-43