Display Operations - The Display Subsystem - Agilent Technologies 8163A Programming Manual

Display Operations – The DISPlay Subsystem
command:
syntax:
description:
parameters:
response:
example:
affects:
command:
syntax:
description:
parameters:
response:
example:
affects:
command:
syntax:
description:
parameters:
response:
example:
affects:
command:
syntax:
description:
parameters:
response:
example:
affects:
Agilent 8163A Lightwave Multimeter, Agilent 8164A Lightwave Measurement System, & Agilent 8166A Lightwave Multichannel
System, Third Edition
Display Operations – The DISPlay
Subsystem
The DISPlay subsystem lets you control what you see on the instrument's
display.
:DISPlay:BRIGhtness
:DISPlay:BRIGhtness<wsp><value>
Controls the brightness for the display.
An integer value in the range 0 to 100
none
disp:brig 75
Agilent 8163A Lightwave Multimeter
:DISPlay:BRIGhtness?
:DISPlay:BRIGhtness?
Requests the brightness for the display.
none
An integer value in the range 0 to 100
disp:brig? → +75<END>
Agilent 8163A Lightwave Multimeter
:DISPlay:CONTrast
:DISPlay:CONTrast<wsp><value>
Controls the contrast for the display.
An integer value in the range 0 to 100
none
disp:cont 50
Agilent 8163A Lightwave Multimeter
:DISPlay:CONTrast?
:DISPlay:CONTrast?
Requests the contrast for the display.
none
An integer value in the range 0 to 100
disp:cont? → +50<END>
Agilent 8163A Lightwave Multimeter
Mass Storage, Display, and Print Functions
131