Table of Contents
Advertisement
Connecting and adjusting the compressed air ampli-
fier
General
Connecting the
compressed-air
booster unit
66
NOTE! When using the compressed air maintenance unit option, connect and ad-
just the compressed air amplifier as per the "Compressed air maintenance unit"
section in the "Robacta TX options" operating instructions.
(1)
(1)
(1)
(1)
Screw a compressed air connection
1
that is suitable for the compressed air
supply line into the compressed air
(1)
connection "B" on the torch body chan-
geover station
-
Seal the compressed air connecti-
on using thread sealing tape
(1)
Depressurise the compressed air sup-
2
ply line and make sure that this com-
(2)
pressed air supply line remains
depressurised for the duration of the
(1)
work on the device
Connect compressed air supply line to
3
compressed air connection "B" on the
(1)
torch body changeover station
Supplying the compressed air supply
4
line with compressed air
Undo the 8 screws (1)
5
Remove lid (2)
6
Advertisement
Table of Contents
Troubleshooting
