Preparing The Torch Body Coupling For Robacta Drive And Robacta Drive Cmt Hosepacks With Plastic Inner Liners; Preparing The Torch Body Coupling For Robacta Drive And Robacta Drive Cmt Hosepacks - Fronius Robacta TX W Operating Instructions Manual

Preparing the torch body coupling for Robacta Drive
and Robacta Drive CMT hosepacks with plastic inner
liners
Preparing the
torch body cou-
pling for Robacta
Drive and Robac-
ta Drive CMT
hosepacks
60
(1)
(3)
(2)
Insert the inner liner from the original
1
equipment kit of the hosepack being
used (1) as far as it will go into the torch
body coupling (2) as shown
Insert cutting pipe (3) of the hosepack
2
being used onto the inner liner
- Cutting pipe item number:
42,0001,5910
Cut off the inner liner (1) at the end of
3
the cutting pipe (3) using a knife
Remove the cutting pipe (3)
4
Remove inner liner from the torch body
5
coupling
Deburr the inner liner at both ends
6
Insert deburred inner liner (1) as far as
7
(1)
it will go into the torch body coupling