Contact Tip Recommendation; Note On Wirefeeding; Compatible System Components For The Overall Welding System - Fronius Robacta TX W Operating Instructions Manual

Torch body coupling
Robacta TX W torch body
Contact tip rec-
ommendation
Note on wirefeed-
ing
Compatible sys- Only use the torch body changeover system in conjunction with the following system com-
tem components ponents:
for the overall -
welding system -
-
-
-
-
-
-
NOTE! In conjunction with the torch body changeover system, we recommend
that you use the 'CB' contact tip.
NOTE! The torch body changeover system can only be used in conjunction with
wirefeeding from the drum coil.
Any power source from the TS/TPS series
Any Fronius robot wire-feed unit
Robacta hosepacks
Robacta Drive hosepacks
Robacta Drive CMT hosepacks
Robacta Reamer V Easy, Robacta Reamer V
Robacta Reamer aluminium brush head
Robacta TC series
- The torch body coupling enables the
torch body to be changed, length of
coupling = 50 mm (1.97 in.)
NOTE! The locking balls (1) are
intended for dry operation. Do not
lubricate the locking balls.
(1)
Wire cutter
19