Safety
Cleaning the gas
hole
(1)
(2)
CAUTION! Risk of injury from compressed air escaping unintentionally. The torch
body changeover station must remain depressurised and de-energised until all
work is completed.
(2)
(3)
Unscrew the gas pin (1) from the core
1
bolt using the 5.5 mm socket wrench
Take the control slide (2) and spring
2
under the control slide off the core bolt
Clean the control slide (2) and spring
3
(3)
NOTE! Do not lubricate the spring
and control slide.
115