Application Example - Fronius Robacta TX W Operating Instructions Manual

Application example

Application ex-
ample
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
40
(1)
(17) (16) (15) (14)
NOTE! Irrespective of the overall welding system setup
- adhere to the compressed air specifications
- provide the compressed air supply to the wire-feed unit and the torch body
changeover station as shown
Compressed air supply line 5.50 -
6.00 bar (79.77 - 87.02 psi)
Compressed air supply line for
wire-feed unit max. 6.00 bar (87.02
psi)
Wire-feed unit
Junction valve
Compressed air supply line from
torch body changeover station to
torch body coupling on the robot 13
bar (174.05 psi)
Hosepack with torch body coupling
and Robacta TX torch body
Compressed air maintenance unit
with filter
Compressed air supply line for
torch body changeover station 5.50
- 6.00 bar (79.77 - 87.02 psi)
Y-distributor
(3)
(2) (4) (5)
(13) (12)
(10) Torch body changeover station with
interface
(11) Data cable
(12) Robot
(13) Drum coil
(14) Power source with cooling unit
(15) Power source interface
(16) Data cable
(17) Robot control
(6)
(11) (10) (9) (8)
(7)