Changing The Steel Inner Liners For Robacta Drive And Robacta Drive Cmt Hosepacks - Fronius Robacta TX W Operating Instructions Manual

Changing the
steel inner liners
for Robacta Drive
and Robacta
Drive CMT hose-
packs
(2) (1)
Robacta Drive
96 mm (3.78 in.)
Robacta Drive CMT
80 mm (3.15 in.)
Unscrew run-off plate (1) from centre
1
bolt (2)
- using a 6 mm socket wrench insert
Remove run-off plate (1) and worn in-
2
ner liner from centre bolt (2)
Cut new inner liner using cutting pliers
3
- Robacta Drive = 96 mm (3.78 in.)
- Robacta Drive CMT = 80 mm
(3.15 in.)
Deburr the inner liner at both ends
4
103