General
Device concept
Scope of supply
Robacta TX is an automatic torch body ch-
angeover system, comprising:
-
Torch body changeover station
-
Torch body coupling
-
Robacta TX torch body
With Robacta TX, robots are used to auto-
matically place worn torch bodies onto the
torch body changeover station and replace
them with new torch bodies. Even switching
between different torch body geometries is
easy with Robacta TX.
In conjunction with a welding torch cleaning
device, Robacta TX is converted into a fully
autonomous torch body maintenance stati-
on that increases system availability and si-
gnificantly reduces setup time.
(1)
Torch body changeover station with
3 torch body racks
(1)
(2)
4 adjustment plates 1 mm (0.04
inch)
(3)
4 adjustment plates 1.5 mm (0.06
(2)
inch)
(3)
(4)
Operating instructions (not shown)
(5)
Junction valve
(6)
Compressed air line, outer diame-
ter 6 mm
(5)
(7)
Compressed air line, outer diame-
ter 8 mm
(6)
(8)
2x M5 self-locking hexagon nuts
(7)
(9)
Fitting panel
(8)
(9)
(10)
2x A5 washers
(10)
(11)
2x TX25 screws
(11)
(12)
2x M5 x 30 mm Allen screws
(12)
(13)
Compressed air connection, diame-
ter 8 mm
(13)
17