Setting Up The Compressed Air Supply; Setting Up The Cleaning Device Compressed Air Supply, Compressed Air Relief Valve Function - Fronius Robacta Reamer X-Line J Operating Instructions Manual

Setting up the Compressed Air Supply

Setting up the Set up the compressed air supply:
cleaning device
1
compressed air
supply, com-
pressed air relief
2
valve function
3
NOTE!
You can interrupt and restore the compressed air supply to the cleaning device by
moving the compressed air relief valve back and forth.
Disconnect the compressed air supply to the cleaning device and ensure that this
compressed air supply remains disconnected while the tasks described below are be-
ing carried out on the device
Screw the supplied compressed air relief valve on to the compressed air connection
on the cleaning device
Connect the compressed air supply to the compressed air relief valve
The illustration to the left shows the com-
pressed air relief valve closed = compres-
sed air supply to the device interrupted
The illustration to the left shows the com-
pressed air relief valve open = device is
being supplied with compressed air
41