Installing The Torch Body Changeover Station - Fronius Robacta TX W Operating Instructions Manual

Installing the
torch body
changeover sta-
tion
46
(5) (5)
(1)
Fit mounting plate and junction valve
4
onto wire-feed unit and secure using 2
TX 25 screws (5) provided
Insert the supplied compressed air line
5
with an outer diameter of 6 mm into
connection (6) on the junction valve
and into the welding torch gas purging
connection (7)
(7)
(6)
Insert compressed air line into com-
1
pressed air connection "A" on the torch
body changeover station and into
connection (1) on the junction valve
Insert gas purging line from the hose-
2
pack (2) into connection (3) on the jun-
ction valve
(3)
(2)