Setting Up The Compressed Air Supply; Setting Up The Cleaning Device Compressed Air Supply, Compressed Air Relief Valve Function - Fronius Robacta Reamer X-Line J Operating Instructions Manual

Setting up the Compressed Air Supply

Setting up the Set up the compressed air supply:
cleaning device
1
compressed air
supply, com-
pressed air relief
2
valve function
3
You can interrupt and restore the compressed air supply to the cleaning device by mov-
ing the compressed air relief valve back and forth - see description below.
The following illustration shows the compressed air relief valve closed = compressed air
supply to the device interrupted:
Compressed air relief valve closed
The following illustration shows the compressed air relief valve open = device is being
supplied with compressed air:
Compressed air relief valve open
Disconnect the compressed air supply to the cleaning device and ensure that this
compressed air supply remains disconnected while the tasks described below are
being carried out on the device
Screw the supplied compressed air relief valve on to the compressed air connection
on the cleaning device
Connect the compressed air supply to the compressed air relief valve
37