Control Elements And Connections; Safety - Fronius Robacta TX W Operating Instructions Manual

Control elements and connections

Safety

Control elements
and connections
(1)
(2)
No.
(1)
(2)
(3)
(4)
(5)
(6)
WARNING! Operating the equipment incorrectly can cause serious injury and
damage. All the functions described may only be used by trained and qualified
personnel. Do not use the functions described until you have thoroughly read and
understood the following documents:
- these operating instructions
- all the operating instructions for the system components, especially the safe-
ty instructions
Function
Wire sensor
checks whether the wire electrode is protruding from the welding torch
I/O connection for accessory equipment
to connect Fronius accessory equipment to the torch body changeover station
Compressed air connection "C"
Unlock/Lock button
for manual operation of the torch body coupling
WARNING! Risk of severe injury from torch body falling. Pressing the Un-
lock/Lock button will release the torch body from the torch body coupling,
causing it to fall to the ground. When pressing the Unlock/Lock button, make
sure that
- the torch body is held in one hand or has been put down in a safe
place
- there are no other persons in the working area of the robot
Compressed air connection "A"
to supply the torch body coupling with compressed air
External power supply connection "A"
supplied with 24 V DC
(3)
(4)
(5)
(6)
(7)
(8)
(9)
27