Setting Up The Robot; Dimensions Of The Rack Holder Including Torch Body Racks; Preparing The Robot Programming Aid - Fronius Robacta TX W Operating Instructions Manual

Setting up the robot

Dimensions of
the rack holder in-
cluding torch
body racks
Preparing the ro-
bot programming
aid
70
350 mm (13.78 in.)
300 mm (11.81 in.)
150 mm (5.91 in.)
75 mm (2.95 in.)
150 mm (5.91 in.)
(1)
175 mm (6.69 in.)
NOTE! Whenever installing the
robot programming aid always:
- check that all five screws (1)
are securely seated
- ensure that the robot pro-
gramming aid is aligned with
the torch body ("Aligning
torch body for special rack po-
sitions")