Preparing System Components For Robacta Hosepacks; Safety; Preparing The Torch Body Coupling For Robacta Hosepacks - Fronius Robacta TX W Operating Instructions Manual

Preparing system components for Robacta hose-
packs

Safety

Preparing the
torch body cou-
pling for Robacta
hosepacks
56
CAUTION! Risk of injury from compressed air escaping unintentionally. The torch
body changeover station must remain depressurised until all work is completed.
(2) (1)
(3)
Press centre bolt (1) out of the torch
1
body coupling (2)
Unscrew run-off plate (3) from centre
2
bolt
- using a 6 mm socket wrench insert