System Components; Necessary System Components - Fronius Robacta TX W Operating Instructions Manual

System components

Necessary sys- To operate the torch body changeover station, the following system components are also
tem components needed in addition to the welding system:
-
-
-
-
-
-
-
Torch body changeover station
TX W tool kit
18
Robacta TX W torch body changeover station
TX W tool kit
Torch body coupling
Robacta TX W torch body
Wire cutter
Compressed air maintenance unit with filter
Robot
The torch body changeover station is used
to:
- hold up to 10 torch bodies
- hold a welding torch cleaning device
- hold a wire cutter
- hold a TCP measurement system
TX W tool kit, comprising
(1)
(1) Installation tool for torch body cou-
pling
(2) Assembly aid for torch body insula-
(2)
tion, welding torch flange and robot
programming aid
(3) Robot programming aid (2 parts)
(3)
(4) 3 TCP tips
(5) Bit insert for coolant stop
(6) Cutting aid
(4)
(5)
(6)