Table of Contents
Advertisement
Powering On/Off
Connect the line cord rated for your country to the AC power inlet on the
back of the instrument, then plug it into a grounded AC power outlet.
(see Power and Grounding on p.5).
Press the Power button on the front to switch on the instrument.
CAUTION. Do not change the instrument's Windows® Power
Options from the default Never to System Standby or System
Hibernate modes.
CAUTION. Do not power on or calibrate the oscilloscope with a
signal attached.
The safest way to power off is to use the File > Shutdown menu bar option.
Briefly pressing the Power button again will power off, but holding will
execute a hard shutdown, and we do not recommend doing this as it
does not allow the Windows operating system to shut down properly, and
memories and setup panels will not be saved.
The Power button and File > Shutdown do not disconnect the
oscilloscope from the AC power supply; some "housekeeping" circuitry
continues to draw power. The only way to fully power down the
instrument is unplug the AC line cord from the outlet.
CAUTION. Do not place the instrument so that it is difficult to
reach the power cord in case you need to quickly disconnect from
AC power.
We recommend unplugging the instrument if it will remain unused for a
long period of time.
SET UP
Language Selection
To change the language that appears on the display, go to Utilities >
Preference Setup > Preferences and make your Language selection.
Restart the oscilloscope software after the language is selected.
If you wish to also change the language of the Windows operating system:
1.
Choose File > Exit to close the oscilloscope application and show the
Windows Desktop.
2.
From the Windows task bar, choose Start > Control Panel > Clock,
Language and Region.
3.
Under Region and Language select Change Display Language.
4.
Click the Install/Uninstall Languages button.
5.
Select Install Language and Browse Computer or Network.
6.
Click the Browse button, navigate to D:\Lang Packs\ and select the
language you want to install. Follow the installer prompts.
7.
After exiting the Control Panel, double-click the Start DSO icon on the
desktop to restart the oscilloscope application.
Note: The available languages are: German, Spanish, French, Italian, and
Japanese. Other language packs are available from Microsoft's website.
13
Advertisement
Table of Contents
