Recalling Previously Used Settings For Sending (Recall Settings) - Canon MF269dw User Manual

Recalling Previously Used Settings for Sending (Recall
Settings)
● When <Restrict Resending from Log> is set to <On>, you cannot use this feature.
Previously Used Destinations(P. 326)
● Turning OFF the machine or setting <Restrict New Destinations> to <On> deletes the past destinations, and
disables this feature.
● The destinations in Manual Sending are not available for this feature.
(Manual Sending)(P. 209)
● When you specify a destination using this feature, any destinations that you have already specified are
deleted.
1
Place the original(s).
2
Select <Fax> in the Home screen.
3
Press .
● If the destinations set by the previous user are still selected, this can cause transmission errors. Always reset
the settings before sending.
4
Select <Destination>
5
Select the destination.
● When you transmit to multiple destinations, only the address specified for the first transmission is displayed
in the log, but all the destinations are specified.
You can recall the destinations specified in the past. When you specify a previously
used destination, the machine also sets the same fax settings such as density you
used the last time you sent documents to that destination.
Restricting New Destinations that Can Be Specified(P. 326)
Placing Originals(P. 128)
Home Screen(P. 111)
<Recall Set.>.
Faxing
Sending a Fax after a Phone Call
207
2KUS-045
Disabling Use of