Reference Manual
00809-0100-4408
5
Configuration
5.1
Safety messages
Instructions and procedures in this section may require special precautions to ensure the
safety of the personnel performing the operations. Information that potentially raises
safety issues is indicated by a warning symbol (
before performing an operation preceded by this symbol.
WARNING
Explosions could result in death or serious injury.
•
Verify that the operating atmosphere of the transmitter is consistent with the
appropriate hazardous locations certifications.
•
Before connecting a handheld communicator in an explosive atmosphere, ensure the
instruments are installed in accordance with intrinsically safe or non-incendive field
wiring practices.
•
In Explosion-proof/Flameproof and Non-Incendive/Type n installations, do not remove
the transmitter covers when power is applied to the unit.
•
Both transmitter covers must be fully engaged to meet Explosion-proof/Flameproof
requirements.
Electrical shock could cause death or serious injury.
•
In Explosion-proof/Flameproof and Non-Incendive/Type n installations, avoid contact
with the leads and terminals. High voltage that may be present on leads can cause
electrical shock.
5.2
Overview
This chapter provides information about configuration and configuration tools. Appendix
Configuration parameters
parameters. The menu trees can be found in
Rosemount 5408 and 5408:SIS Level Transmitters
). Refer to the following safety messages
provides extended information about the configuration
Menu
tree.
Configuration
February 2020
83