Emerson Rosemount 5408 Reference Manual page 129

Reference Manual
00809-0100-4408
Related information
Save a backup file of the device configuration
Restore to default settings using AMS Device Manager and
handheld communicator
This function restores the transmitter to default settings (user configuration is
overwritten).
Prerequisites
Before restoring the transmitter to default settings, it is recommended to backup the
device configuration. The backup file can be used to restore configuration at a later stage.
Procedure
1. Select Service Tools → Maintenance → Reset/Restore.
2. Select Restore Default Settings and follow the on-screen instructions.
Related information
Save a backup file of the device configuration
7.4.9 Use the simulation mode
Use the simulation mode with Rosemount Radar Master Plus
This function can be used to simulate measurements.
Procedure
1. Under Service Tools, select Simulate.
2. Select Simulate next to desired transmitter variable and follow the on-screen
Use the simulation mode with AMS Device Manager and
handheld communicator
This function can be used to simulate measurements.
Procedure
1. Select Service Tools → Simulate.
2. Under Simulate Measurement Values, select desired transmitter variable and follow
Rosemount 5408 and 5408:SIS Level Transmitters
instructions.
the on-screen instructions.
Service and troubleshooting
February 2020
129