Mechanical installation
February 2020
5. Lower transmitter with antenna into the nozzle.
Postrequisites
Align the transmitter head (see
3.5.6
Threaded version, antenna diameter larger than thread
diameter
Prerequisites
If applicable, assemble the segmented cone antenna (see
antenna).
Procedure
1. Unscrew and remove the antenna.
42
A. Gasket (for 1½-in. and 2-in. BSPP (G) threads only)
H2 mm
Note
Be careful not to scratch the microwave launcher. The microwave launcher is
sensitive to mechanical impacts.
Align transmitter
head).
Reference Manual
00809-0100-4408
Assemble the segmented cone
Reference Manual