Emerson Rosemount 5408 Reference Manual page 178

Specifications and reference data
February 2020
A.3.2 Transmissible Spongiform Encephalopathy (TSE)
Declaration
This declaration is applicable to Tri-Clamp
Emerson certifies no process wetted components used in hygienic seal products contain
substances of animal origin. Materials used in the production or processing of wetted
components for hygienic seals meet the requirements stated in EMA/410/01 Rev. 3 and
ISO 22442-1:2015. Wetted components in hygienic seals are considered free of TSE.
A.3.3 Engineered solutions
When standard model codes are not sufficient to fulfill requirements, please consult the
factory to explore possible Engineered Solutions. This is typically, but not exclusively,
related to the choice of wetted materials or the design of a process connection. These
Engineered Solutions are part of the expanded offerings and may be subject to additional
delivery lead time. For ordering, factory will supply a special P-labeled numeric option
code that should be added at the end of the standard model string.
A.3.4 Housing and enclosure
Electrical connections
Two cable/conduit entries (½-14 NPT, M20 x 1.5, or G½)
Optional adapters: M12 4-pin male eurofast connector or A size Mini 4-pin male minifast
connector
Materials
• Electronics housing: Polyurethane-covered Aluminum or Stainless Steel Grade CF-8M
(ASTM A743)
• Sensor module: 316L SST
Weight
• Aluminum housing: 6.2 lb (2.8 kg)
• Stainless steel housing: 10.0 lb (4.5 kg)
Ingress protection
IP 66/67/68
A.3.5 Tank connection
The tank connection consists of a tank seal, a flange, NPT or BSPP (G) threads, Tri-Clamp
or a specific welded connection with swivel feature for parabolic antenna.
(17) Fully functional transmitter with sensor module, housing, terminal block, LCD display, and covers.
(18) The transmitter meets IP 68 at 9.8 ft. (3 m) for 30 minutes.
178
(18) ®
and NEMA 4X
®
connections.
(17)
(17)
Reference Manual
00809-0100-4408
®
,
Reference Manual