Electrical installation
February 2020
Note
The operational mode on the Rosemount 5408:SIS must be set to Control/Monitoring
when used with the Rosemount 333 HART Tri-Loop.
Figure 4-6: Example Installation of Rosemount 333 with Rosemount 5408
A. Approved IS barrier
B. DIN rail mounted Rosemount 333
C. Load resistance (≥250 Ω)
D. Control room
Refer to the Rosemount 333 HART Tri-Loop
how to install and configure the Rosemount 333.
82
Reference Manual
for further information on
Reference Manual
00809-0100-4408
Reference Manual