Emerson Rosemount 5408 Reference Manual page 200

Specifications and reference data
February 2020
Table A-18: Rosemount 5408 Series Spare Parts List - Antenna
Dye penetration test certificate
Q73 Certificate of Liquid Penetrant Inspection
Positive material identification certificate
Q76 Positive Material Identification Certificate of Conformance
(17)
Shipboard approvals
SBS American Bureau of Shipping Type Approval
SDN Det Norske Veritas Germanischer Lloyd (DNV GL) Type Approval
SLL Lloyd's Register Type Approval
SBV Bureau Veritas Type Approval
Extended product warranty
WR3 3-year Limited Warranty
WR5 5-year Limited Warranty
Specials (see Engineered
PXXXX Custom Engineered Solutions beyond standard model codes. Consult factory for details.
Typical model number: 5408 Z 9 Z Z Z Z NA 1 R 3 AB CAB 3
(1) Type A flat face for EN 1092-1 flanges.
(2) Type B1 raised face for EN 1092-1 flanges.
(3) For applications where saturated steam may occur, consult factory.
(4) Pressure limit is derated for process temperatures above 100 °F (38 °C), see
(5) Refer to Figure A-6 for pressure/temperature ratings of Tri-Clamp connection.
(6) 1½-in. (DN40) cone antenna is available for 1½-in. NPT threaded connection and materials of construction code 1
(316/316L/EN 1.4404).
(7) Option code PC1 is for cone antennas only, and requires matching flange and antenna sizes. Note that all parabolic
antennas come with an integrated air purge connection.
(8) A minimum gasket thickness of 0.125 in. (3.2 mm) is required for flanges with protective plate design.
(9) Only applies to flanged process connections with welded construction or protective plate design; only applicable to
cone antennas (see Table A-13
(10) Flanged process connections with protective plate design are only available with ASME IX (option code AW).
(11) Not available with EN1092-1 or JIS B2220 flanges, neither for ASME B16.5 flanges in materials of construction code M.
(12) Hydrostatic testing is only available for cone antennas and process seal antennas with flanged process connections.
(13) Certificate includes all pressure retaining and wetted parts.
(14) Only available for process seal antennas with Tri-Clamp connection.
(15) Applicable only to wetted parts.
(16) Not available with parabolic antenna.
(17) Transmitters with aluminum housing are not approved for open deck installations; for use only in engine room, pump
room, etc.
A.6.1 Accessories
Table A-19: Accessories
HART modem and cable
03300-7004-0002 MACTek
200
(9)
solutions)
and Table A-14).
® ®
VIATOR HART modem and cables (USB connection)
(continued)
Figure A-4 for details.
Reference Manual
00809-0100-4408
Reference Manual