Reference Manual
00809-0100-4408
3. Remove the plastic plugs.
4. Pull the cable through the cable gland/conduit.
5. Connect the cable wires (see
6. Ensure proper grounding (see Grounding).
Unless marked, the conduit/cable entries in the transmitter housing use a ½–14 NPT thread form.
(2)
Rosemount 5408 and 5408:SIS Level Transmitters
Identification of thread size and type:
Torque 7 in-lb (0.8 N-m)
(2)
Wiring
diagram).
Electrical installation
February 2020
79