Additional Information On The Simogear Geared Motor; General Information Geared Motor With Sinamics G115D Motor Mounted / Wall Mounted; Obligations Of The User - Siemens SINAMICS G115D Operating Instructions Manual

Additional information on the SIMOGEAR geared
motor
11.1 General information geared motor with SINAMICS G115D Motor
Mounted / Wall Mounted
11.1.1

Obligations of the user

Comply with the following safety instructions:
Comply with the notes on the rating plates attached to the geared motor. The rating plates
must be kept free from paint and dirt at all times. Replace any missing rating plates.
In the event of changes during operation, switch off the drive unit immediately.
When removing protective equipment, keep fasteners in a safe place. Re-attach previously
removed protective equipment before commissioning.
Collect and dispose of used oil in accordance with regulations. Immediately remove any oil
spills with an oil-binding agent.
Do not carry out any welding work on the geared motor. Do not use the geared motor as a
grounding point for welding operations.
Equipotential bonding in accordance with applicable regulations and directives must be
carried out by electrotechnology specialists.
Do not use high-pressure cleaning equipment or sharp-edged tools to clean the geared
motor.
Comply with the permissible tightening torque of the fixing screws.
Replace damaged bolts with new screws of the same property and strength class.
Siemens AG accepts the warranty only for original spare parts.
The manufacturer who installs the geared motors in a plant must include the regulations
contained in the operating instructions in its own operating instructions.
SINAMICS G115D distributed drive
Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002
11
385