Gearbox With Flange Mounting - Siemens SINAMICS G115D Operating Instructions Manual

Distributed drive for conveyor technology control
Hide thumbs Also See for SINAMICS G115D:
Table of Contents

Advertisement

Additional information on the SIMOGEAR geared motor
11.3 Specific data gearbox
The foundation should be designed in such a way that no resonance vibrations are created
and no vibrations are transmitted from adjacent foundations.
The foundation structure on which the gearbox is to be mounted must be torsionally rigid. It
must be dimensioned according to the weight and torque, taking into account the forces
acting on the gearbox. If the substructure is too weak, it will cause radial or axial
displacement offset during operation that cannot be measured at a standstill.
If the gearbox is fastened to a concrete foundation, use foundation blocks for the appropriate
recesses.
Align and grout the slide rails into the foundation.
Align the gearbox carefully with the units on the input and output side. Take into account the
elastic deformation due to operating forces.
Prevent displacement from external forces due to lateral impacts.
Use stud bolts or headless screws of property class 8.8 or higher for the mounting foot.
Observe the tightening torque.
Table 11- 32 Thread size of the fastening bolt
Thread size
M8
M10
M12
M16
11.3.9

Gearbox with flange mounting

Note
Siemens AG recommends an anaerobic adhesive to enhance the friction lock between flange
and mounting surface.
Table 11- 33 Thread size of the fixing screw
Thread
size
M6
M8
M10
M12
M16
M16
444
Helical gearbox
E
D/Z
Size
-
19, 29, 39
39
-
49
49, 59, 69
69, 89
79, 89
Flange
Helical gearbox
E, D/Z
Size
A120
19, 29, 39
A140, A160
19, 29, 39, 49, 59
A200
39, 49, 59, 69
A250, A300
49, 59, 69, 79, 89
A350
79, 89
A450
89
Parallel shaft
gearbox F
29, 39
49
69, 79
89
Parallel shaft
Bevel gearbox
gearbox F
B, K
29
B19, B29
29, 39
B29, B39, K39
49
B39, B49, K49
69, 79, 89
K69, K79, K89
-
-
-
-
Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002
Bevel gearbox
Helical worm
B, K
gearbox C
B19, B29, B39
29
B49, K39, K49
39, 49
K69, K79
69
K89
89
Helical worm
gearbox C
29
29, 39
49, 69
89
-
-
SINAMICS G115D distributed drive

Advertisement

Table of Contents
loading

Table of Contents