Two-Wire Control, Method 2 - Siemens SINAMICS G115D Operating Instructions Manual
Distributed drive for conveyor technology control
Hide thumbs
Also See for SINAMICS G115D:
- Operating instructions manual (522 pages) ,
- Operating instructions manual (600 pages)
Table of Contents
Advertisement
Advanced commissioning
6.4 Controlling clockwise and counter-clockwise rotation via digital inputs
6.4.2
Two-wire control, method 2
Commands "ON/OFF1 clockwise rotation" and "ON/OFF1 counter-clockwise rotation" switch
on the motor - and simultaneously select a direction of rotation. The converter only accepts a
new command when the motor is at a standstill.
ON/OFF1 clockwise
Parameters
Select two-wire control, method 2
Parameter
p0015 = 61
Changing the assignment of the digital inputs
Parameter
p3330[0 ... n] = 722.x
p3331[0 ... n] = 722.x
130
ON/OFF1 counter-
rotation
clockwise rotation
0
1
0
1
Description
Macro drive unit
You must carry out quick commissioning in order to set parameter p0015.
Assigning digital inputs DI to the commands:
DI 0: ON/OFF1 clockwise rotation
DI 1: ON/OFF1 counter-clockwise rotation
Description
BI: 2/3 wire control command 1 (ON/OFF1 clockwise rotation)
BI: 2/3 wire control command 2 (ON/OFF1 counter-clockwise rotation)
Example: p3331 = 722.0 ⇒ DI 0: ON/OFF1 counter-clockwise rotation
Function
0
OFF1: The motor stops.
0
ON: Clockwise motor rotation.
1
ON: Counter-clockwise motor rotation.
1
ON: The motor direction of rotation is defined
by the command that first reaches state "1".
Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002
SINAMICS G115D distributed drive
Advertisement
Table of Contents
