Technical Data Of Inputs And Outputs - Siemens SINAMICS G115D Operating Instructions Manual

10.1.2

Technical data of inputs and outputs

Property
Fieldbus interface
Operating voltage
24 V power supply
Setpoint resolution
Digital inputs
Configurable DI/DO
Motor temperature
sensor
Fail-safe digital input
SINAMICS G115D distributed drive
Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002
10.1 Technical data of the G115D converter with SIMOGEAR geared motor
Explanation
PROFINET
AS-i
• PROFINET variant:
• I/O control variant:
• AS-i variant :
1)
There are three options regarding the 24 V supply:
• The converter obtains its 24 V power supply via terminals (glanded variant) or via the M12 L-
code connector or 7/8" connector with 24 V DC ± 15%
• The converter obtains its 24 V power supply via X03 (AS-i variant only, M12 A-code, two poles
with AS-i power supply, two poles with 24 V DC ± 15%)
• The converter generates its 24 V power supply from the line voltage via the optional 24 V
power supply unit.
0.01 Hz
4 (DI 0 to DI 3)
2 (DIO 24 & DIO 25)
PTC
Pt1000
KTY84
Temperature switch
1 (DI 2 and DI 3)
24 V DC ± 15%
24 V DC ± 15%
26.5 V to 31.6 V, 24 V DC ± 15%
• Programmable digital inputs
• PNP, SIMATIC-compatible
• Unswitched logic supply
• Input voltage: High > 11 V, Low < 5 V
• Maximum input voltage: 30 V
• Maximum input current: 15 mA
• Can be configured as digital inputs or outputs
• When used as digital inputs:
Switched logic supply
–
Same specification as DI 0 to DI 3
–
• When used as digital output:
PNP
–
– Switched logic supply
24 V DC/0 A to 0.5A (resistive load)
–
– Continuous current rating: max. 500 mA for two DOs in total
Updating time of all digital outputs: 2 ms
–
• Short-circuit monitoring < 20 Ω
• Overtemperature 1650 Ω
• Measurement range: -48 °C to 248 °C
• Short-circuit monitoring < 603 Ω
• Wire-break > 2120 Ω
• Measurement range: -48 °C to 248 °C
• Short-circuit monitoring < 50 Ω
• Wire-break > 2120 Ω
• Opened temperature switch ≥ 100 Ω
• If you enable safety function STO, then the fail-safe digital input
comprises the two digital inputs DI 2 and DI 3.
• The fail-safe digital inputs are in accordance with EN 61131-2:
Input voltage: High > 11 V, Low < 5 V
–
– Maximum input current: 15 mA
– Maximum input voltage: 30 V
• Response time:
– When the debounce time p9651 > 0: Typical 5 ms + p9651,
worst case 15 ms + p9651
When debounce time = 0: Typical 6 ms, worst case 16 ms
–
Technical data
361