Disposal - Siemens SINAMICS G115D Operating Instructions Manual

Additional information on the SIMOGEAR geared motor
11.1 General information geared motor with SINAMICS G115D Motor Mounted / Wall Mounted
11.1.14

Disposal

Incorrect disposal of used oil
Incorrect disposal of used oil is a threat to the environment and health.
After use, oil must be taken to a used oil collection point. The addition of foreign substances
such as solvents, brake and cooling fluid is prohibited.
Avoid prolonged contact with the skin.
Empty the used oil from the gearbox. The used oil must be collected, stored, transported and
disposed of in accordance with regulations. Do not mix polyglycols with mineral oil. Dispose
of polyglycols separately.
Please observe country-specific laws. Under German law, to allow optimal treatment of the
oil (§ 4 VI Used Oil), oils with different disposal codes must not be mixed with one another.
Collect and dispose of used oil in accordance with regulations.
Remove oil spillages immediately with an oil-binding agent in compliance with environmental
requirements.
Dispose of the housing parts, gears, shafts, and rolling bearings of the geared motor as scrap
metal.
Dispose of packaging material in accordance with regulations.
Table 11- 4
Type of oil
Mineral oil
Polyglycols
Poly-Alpha-Olefines
Biologically degradable oils
396
WARNING
Disposal codes for gear oils
Designation
CLP ISO VG220
CLP ISO PG VG220,
CLP ISO PG VG460,
CLP ISO H1 VG100,
CLP ISO H1 VG460
CLP ISO PAO VG68,
CLP ISO PAO VG220,
CLP ISO PAO VG460
CLP ISO E VG220
Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002
Disposal code
13 02 05
13 02 08
13 02 06
13 02 07
SINAMICS G115D distributed drive