Finalizing Online Commissioning - Siemens SINAMICS G115D Operating Instructions Manual

Distributed drive for conveyor technology control

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

Advanced commissioning

6.14 Safe Torque Off (STO) safety function

Finalizing online commissioning

After you finish the configuration of the safety function, proceed through the following

operations to activate the settings.

Precondition

You are online with Startdrive.

Function description

1. Press the

2. Confirm the prompt for saving your settings (copy RAM to ROM).

3. Disconnect the online connection.

4. Select the

5. Save the project.

6. Switch off the converter power supply.

7. Wait until all LEDs on the converter go dark (no voltage condition).

8. Switch the converter power supply on again.

Your settings are now active.

button to end the safety commissioning.

button to transfer settings from the PG/PC to the converter.

Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002

SINAMICS G115D distributed drive