Siemens SINAMICS G115D Operating Instructions Manual page 418

Additional information on the SIMOGEAR geared motor
11.2 Specific data motor
Type of conductor connection
Angle DIN cable lug down for connection. DIN 46234
Connection of an individual conductor with the terminal clamp.
Connecting 2 conductors with approximately the same thickness using a terminal clamp.
① Link rail
② Line connecting cable
③ Motor connecting cable
④ Cover washer
Grounding connection type
Connection of an individual conductor under the external grounding bracket.
Connect with the DIN cable lug under the external grounding bracket DIN 46234.
416
Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002
Conductor cross-section
... 25 mm
2
... 10 mm
2
... 25 mm
2
Conductor cross-section
... 10 mm
2
... 25 mm
2
SINAMICS G115D distributed drive