Digital Outputs - Siemens SINAMICS G115D Operating Instructions Manual

6.3.3

Digital outputs

Changing the function of the digital outputs
Parameterized as digital outputs
1)
Binector outputs of the converter
0
r0052.0
r0052.1
r0052.2
r0052.3
r0052.4
r0052.5
r0052.6
r0052.7
r0052.8
A complete list of the binector outputs is provided in the List Manual.
Example
Advanced settings
You can invert the signal of the digital output using parameter p0748.
For more information, see the parameter list and the function block diagram 2230 of the List
Manual.
SINAMICS G115D distributed drive
Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002
Deactivating digital output
Drive ready
Drive ready for operation
Drive running
Drive fault active
OFF2 active
OFF3 active
Switching on inhibited active
Drive alarm active
Setpoint/actual value discrepancy
6.3 Adapt the default settings of the inputs and outputs
Interconnect the digital output with a binector
output of your choice.
Interconnecting signals in the converter
(Page 535)
Binector outputs are marked with "BO" in the
parameter list of the List Manual.
r0052.9 Process data control
r0052.10 f_actual >= p1082 (f_max)
r0052.11 Alarm: Motor current/torque limit
r0052.12 Brake active
r0052.13 Motor overload
r0052.14 Motor CW rotation
r0052.15 Converter overload
r0053.0 DC braking active
r0053.2 f_actual > p1080 (f_min)
r0053.6 f_actual ≥ setpoint (f_setpoint)
In order to output the fault message over the digital
output DI/DO 25, you have to connect the DI/DO 25
with the fault message: Set p0739 = 52.3.
Advanced commissioning
127