Siemens SINAMICS G115D Operating Instructions Manual page 39

Distributed drive for conveyor technology control

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

Mounting clearance

Maintain a minimum clearance distance of 150 mm (5.9 in) from the converter to the wall.

For mounting clearance distance around the motor, refer to the following chapter:

Dimensions of the geared motor

For further information on the dimensions of the geared motors, refer to the following

documentation:

• The relevant chapter in this manual

• The relevant catalog

• Drive Technology Configurator (DT Configurator)

You can generate and download data sheets, 2D dimension drawings and 3D CAD models

of the geared motors.

SINAMICS G115D distributed drive

Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002

Installation conditions for the motor (Page 409)

Additional information on the SIMOGEAR geared motor (Page 385)

Catalog D 31.2 (https://support.industry.siemens.com/cs/ww/en/view/109750324)

DT Configurator (http://www.siemens.com/dt-configurator)

3.1 Mounting the G115D Motor Mounted drive