Mounting
3.3 Mounting the optional components
Outline dimensions and drill pattern
Article number
6SL3501-1BE32-0AA0
6SL3501-1BE32-4AA0
6SL3501-1BE34-8AA0
6SL3501-1BE32-0BA0
6SL3501-1BE32-4BA0
6SL3501-1BE36-0BA0
6SL3501-1BE36-0CA0
6SL3501-1BE41-2CA0
Fixing to the mounting surface
3.3.2
Mounting the SINAMICS G120 Smart Access
To mount the SINAMICS G120 Smart Access to the G115D converter, you must use the
optional SAM interface kit (Page 34).
Outline dimensions
All dimensions are specified in millimeters.
42
Dimensions (mm/inch)
H
W
D
320 (12.6)
106 (4.2)
67 (2.6)
241 (9.5)
213 (8.4)
96.5 (3.8)
320 (12.6)
106 (4.2)
67 (2.6)
241 (9.5)
223 (8.8)
96.5 (3.8)
241 (9.5)
343 (13.5)
110.5 (4.4) 295 (11.6)
Fastening
4 x M4 screws, nuts, washers
Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002
A
B
86 (3.4)
300 (11.8)
165 (6.5)
176 (6.9)
86 (3.4)
300 (11.8)
175 (6.9)
176 (6.9)
176 (6.9)
Tightening torque
2.5 Nm (22.1 lbf.in)
SINAMICS G115D distributed drive
Weight
(kg/lb.)
1.56 (3.43)
2.10 (4.62)
3.89 (8.56)
1.56 (3.43)
2.10 (4.62)
3.42 (7.52)
5.47 (12.03)