Permissible Line Supplies - Siemens SINAMICS G115D Operating Instructions Manual

Wiring

4.2 Permissible line supplies

The connections in the following figure provide a solid, high-frequency bonding between the
driven machine and the converter.
Further information
Additional information about EMC-compliant installation is available on the Internet:
(https://support.industry.siemens.com/cs/ww/en/view/60612658)
4.2 Permissible line supplies
Note
Fault protection in case of insulation failure for the motor circuit
The electronic overcurrent trip of the converter complies with the requirements laid down in
IEC 60364-4-41:2005/AMD1:2017 Section 411 and Appendix D for protection against electric
shock.
• Observe the installation specifications provided in this manual.
• Observe the applicable installation standards.
• Ensure the continuity of the protective conductor.
48
EMC installation guideline
Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002
SINAMICS G115D distributed drive