Setpoints; Overview - Siemens SINAMICS G115D Operating Instructions Manual

Advanced commissioning

6.15 Setpoints

6.15 Setpoints
6.15.1

Overview

The converter receives its main setpoint from the setpoint source. The main setpoint
generally specifies the motor speed.
You have the following options when selecting the source of the main setpoint:
• Converter fieldbus interface
• Converter analog input
• Electromechanical potentiometer
• Motorized potentiometer simulated in the converter
• Fixed setpoints saved in the converter
You have the same selection options when selecting the source of the supplementary
setpoint.
Under the following conditions, the converter switches from the main setpoint to other
setpoints:
• When the technology controller is active and appropriately interconnected, its output
specifies the motor speed.
• When jogging is active.
• When controlling from a Startdrive PC tool or the SINAMICS G120 Smart Access.
230
Operating Instructions, 12/2020, FW V4.7 SP13, A5E48681219B-002
SINAMICS G115D distributed drive