Supplementary Cyclic Settings; Transient Transmission Group No. Setting; Communication Mode; Parameter Name - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

Supplementary cyclic settings

Set the station-based block data assurance and I/O maintenance settings.
Item
Station-based Block Data Assurance
I/O Maintenance Settings

Transient transmission group No. setting

Set the transient transmission group number.
Item
Transient Transmission Group No.
Setting

Communication mode

Set the communication mode.
Item
Communication Mode

Parameter name

Set a name for the module parameter if desired.
Item
Parameter Name
7 PARAMETER SETTINGS
98
7.4 Application Settings
Description
Select whether to ensure data integrity of the data blocks being refreshed
between the FX5 CPU module and the FX5-CCLGN-MS. ( Page 34
Cyclic data assurance)
Output Hold/Clear Select whether cyclic data output is held or cleared when the FX5 CPU
Setting during CPU module mounted with the FX5-CCLGN-MS is set to the STOP state. (
STOP Page 41 I/O maintenance settings)
Data Link Error Station Select whether input data from the master station is held or cleared when a
Setting data link error occurs. ( Page 41 I/O maintenance settings)
Output Mode upon CPU Select whether cyclic transmission output data is held or cleared when a
Error stop error occurs in the FX5 CPU module mounted with the FX5-CCLGN-
MS. ( Page 41 I/O maintenance settings)
Description
Set the group number to perform transient transmission using group
specification.
Description
Set the communication mode.
Description
Set a name for the module parameter if desired.
Setting range
• Enable
• Disable
(Default: Enable)
• Hold
• Clear
(Default: Hold)
• Clear
• Hold
(Default: Clear)
• Clear
• Hold
(Default: Clear)
Setting range
0 to 32 (0: No group specification)
(Default: 0)
Setting range
• Unicast
• Multicast
(Default: Unicast)
Setting range
Up to 8 one-byte or two-byte
characters
(Default: empty)