Structure With Modules On Cc-Link Ie Tsn And Ethernet Devices - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

Structure with modules on CC-Link IE TSN and Ethernet devices

Connection with modules on CC-Link IE TSN and Ethernet devices
■Line topology
The network with modules and devices is configured in a line topology. A TSN switching hub is not required.
Up to eight modules on CC-Link IE TSN can be connected to P1 or P2 of the master station at the position indicated with (1).
Connect Ethernet devices to the end of the network.
No.0
Class B
No.0: Master station
No.1: Local station (1st module)
No.8: Remote station (8th module)
(2) Ethernet device
Class A: Authentication Class A device
Class B: Authentication Class B device
When an error occurs in a slave station, the stations connected after the faulty station will be disconnected.
■Star topology
Modules or devices are connected in a star topology via a switching hub.
• Because cyclic data is sent to an Ethernet device when a local station is used with an Ethernet device on the end side via a
switching hub, communication may not be possible depending on the type of an Ethernet device.
No.0
Class B
No.1
Class A
No.0: Master station
No.1, No.2: Local station
(1) Ethernet device
Class A: Authentication Class A device
Class B: Authentication Class B device
5 SYSTEM CONFIGURATION
82
5.2 Structure of Authentication Class B/A Devices and Ethernet Devices
No.1
Class B
No.2
Class A
General-purpose
switching hub
(1)
No.8
Class A
(1)
(2)