Appendix 5
The link special register (SW) stores the information during data link as a numerical value. Faulty areas and causes can be
checked by using or monitoring the link special register (SW) in programs.
Application of link special register (SW)
By using link special register (SW), the status of CC-Link IE TSN can be checked from HMI (Human Machine Interfaces) as
well as the engineering tool.
Refresh of link special register (SW)
To use link special register (SW), set them in "Refresh Settings" under "Basic Settings" so that they are refreshed to the
devices of the FX5 CPU module. ( Page 93 Refresh settings)
Range where data is stored by users and range where data is stored by the system
The following ranges correspond to when the link special register areas (SW) are assigned from SW0000 to SW0FFF.
• Stored by users: SW0000 to SW001F
• Stored by the system: SW0020 to SW0FFF
APPX
206
Appendix 5 List of Link Special Register (SW)
List of Link Special Register (SW)