Structure With Modules On Cc-Link Ie Tsn - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

Structure with modules on CC-Link IE TSN

Connection with modules on CC-Link IE TSN only
■Line topology
The network is configured in a line topology.
• Up to eight authentication Class B devices can be connected to P1 or P2 of the master station.
No.0 (1)
Class B Class B
(1)
Class B
No.0: Master station
(1) Local station (1st device)
(2) Remote station (2nd device)
(3) Remote station (8th device)
Class B: Authentication Class B device
• The authentication Class B device cannot be connected to the authentication Class A device.
No.0 No.1
Class B Class B
No.0: Master station
No.1, No.4: Local station
No.2, No.3: Remote station
Class A: Authentication Class A device
Class B: Authentication Class B device
• Connection cannot be made if the total cyclic data size of all slave stations on the authentication Class A device side that
form a boundary between authentication Class B and authentication Class A exceeds 2K bytes.
No.0 No.1
Class B Class B
No.0: Master station
No.1: Local station
No.2, No.3, and No.4: Remote station
Class A: Authentication Class A device
Class B: Authentication Class B device
 Set the total cyclic data size within 2K bytes.
(2)
Class B
... ...
(2) (2)
Class B Class B
... ...
No.2 No.3
Class B Class A
No.2
Class B
No.3
Class A
5.2 Structure of Authentication Class B/A Devices and Ethernet Devices
(3)
Class B
(3) (3)
Class B Class B
No.4
Class B
Ò
No.4
Class A
... ...
5 SYSTEM CONFIGURATION
5
77