Time Synchronization - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

Cc-link ie tsn
Hide thumbs Also See for MELSEC iQ-F FX5 Series:
Table of Contents

Advertisement

Time synchronization

The time of slave stations is synchronized with the time synchronization source (CPU module of the master station).
No.0
Setting method
The time synchronization is set to the buffer memory. ( Page 194 Time synchronization)
Set the same time zone to the CPU modules of the master and local stations.
When the FX5-CCLGN-MS is used as the master station, do not connect time synchronization devices whose
time synchronization priority is 0 to 15. For the priority verification method and setting method, refer to the
manual of the time synchronization device.
Precautions
• When this function is used, the time setting function (SNTP client) of the Ethernet-equipped module cannot be used. (
MELSEC iQ-F FX5 User's Manual (Ethernet Communication))
• When time synchronization is also to be performed for the CPU module of the local station, time synchronization on the
local station side needs to be set as well.
• When multiple FX5-CCLGN-MSs are mounted to an FX5 CPU module, set time synchronization for only one FX5-CCLGN-
MS. When time synchronization is set for multiple, they are overwritten by the time that is synchronized later.
4 FUNCTIONS
62
4.6 RAS
No.1
No.2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melsec iq-f fx5uMelsec iq-f fx5uc

Table of Contents