Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual page 152

In the following cases, the network map is displayed differently from the actual connection status.
Connection status
Two stations are connected through a switching hub.
No.0
Switching hubs are in cascade connection.
No.0
No.1
Precautions
Stations in offline mode are not displayed in the network map. In line topology, stations connected after a station in offline
mode are not displayed because they are disconnected.
10 TROUBLESHOOTING
150
10.3 Checking the Network Status
TSN switching hub
No.1
TSN switching hub
TSN switching hub
No.2
No.3
Display of the network map
Branches are not displayed in the network map.
Only one branch is displayed.