Program Example (At Unicast Mode) - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

Program example (At unicast mode)

This section describes a program example when "Communication Mode" under "Application Settings" is set to "Unicast".
Master station (station No.0)
Classification Label name
Module label FX5CCLGN_1.bSts_DataLinkError_D
FX5CCLGN_1.bnSts_DataLinkError_Station_D[1]
FX5CCLGN_1.bnSts_DataLinkError_Station_D[2]
Label to be defined Define global labels as shown below:
Description
Data link error status of own station
Data link status of each station (station No.1)
Data link status of each station (station No.2)
9.2 Communication Example between the Master Station and Local station
Device
SB0049
SW00B0.0
SW00B0.1
9 PROGRAMMING
119
9