Supplementary Settings - Mitsubishi Electric MELSEC Q Series Reference Manual

5 PARAMETER SETTINGS

5.1.4 Supplementary settings

5 - 15
The supplemental settings are included in common parameter settings to provide more
precise usage. Keep the default settings for normal use.
Common parameters supplemental are only for remote master stations.
1)
2)
3)
4)
5)
6)
7)
[Setting items]
1) Constant scan
The constant link scan function is used to maintain the link scan time
constant.
If the response time is long for the transient transmission function,
setting the constant link scan function may reduce the response time.
Set a value in the following range to use a link scan time:
Setting time
Blank
1 to 500 ms
MELSEC-Q
Constant link scan
Not executed (default)
Executed using the set time
5 - 15