Chapter 3 Procedures Before Operation - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

3
PROCEDURES BEFORE OPERATION
This chapter describes the procedures before operation.
1.
Checking the specifications of the FX5-CCLGN-MS
Check the specifications of the FX5-CCLGN-MS. ( Page 16 SPECIFICATIONS)
2.
Mounting the FX5-CCLGN-MS
Mount the FX5-CCLGN-MS to the FX5 CPU module. For details, refer to the following.
 MELSEC iQ-F FX5U User's Manual (Hardware)
 MELSEC iQ-F FX5UC User's Manual (Hardware)
3.
Wiring
Connect an Ethernet cable to the FX5-CCLGN-MS.
Wiring ( Page 85 WIRING)
4.
Network configuration
Configure the system and set the parameters which are required for start-up.
Parameter setting (Page 89 PARAMETER SETTINGS)
5.
Network diagnostics
Use the network diagnostics to check that cables are connected properly and that modules are communicating correctly with
the set parameters.
For details, refer to the following.
Page 144 Checking the Network Status
6.
Programming
Create a program. For details, refer to the following.
Page 107 DEDICATED INSTRUCTION
7.
Debugging
Use the CC-Link IE TSN/CC-Link IE Field diagnostics for debugging.
3 PROCEDURES BEFORE OPERATION
20