Refresh Settings - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

Refresh settings

Assign link refresh ranges between the following devices.
• SB, SW, link devices (RX, RY, RWr, RWw) of the FX5-CCLGN-MS  Devices of the FX5 CPU module
Setting method
The procedure for the refresh settings is as follows.
1.
Set the required items.
2.
Click the [Apply] button to finish "Refresh Settings".
Setting items
The setting items for the refresh settings are as follows.
Item Description
Device Assignment Right-click in the setting window and select a link device assignment method
Method from the "Device Assignment Method" menu.
• Start/End: Enter the start and end numbers of link devices.
• Points/Start: Enter the numbers of points and start numbers of link devices.
 Link Side Set the link refresh ranges of SB and SW. One link refresh range can be set
for each of SB and SW. ( Page 32 Link refresh)
Ex.
00000H
·
001FFH
00000H
·
001FFH
CPU Side
Device name
(SB)
Device name
(SW)
FX5-CCLGN-MS
Setting range
For master stations For local stations
• Start/End
• Points/Start
(Default: Start/End)
■Device Name
• SB (fixed)
• SW (fixed)
■Points
• SB: 16 to 4096 (set in increments of 16 points)
• SW: 1 to 4096
(Default: empty)
■Start
• SB: 0H to FF0H (set in increments of 16 points)
• SW: 0H to FFFH (set in increments of 1 point)
00000H
(Default: empty)
Device name
·
■End
(SB)
001FFH
• SB: FH to FFFH (set in increments of 16 points)
• SW: 0H to FFFH (set in increments of 1 point)
00000H
Device name
(Default: empty)
·
(SW)
001FFH
■Target
• Specify Device
(Default: empty)
■Device name
• Specify Device (link side is SB): SB, M, L, B, D,
R
• Specify Device (link side is SW): SW, M, L, B, D,
FX5 CPU module R
(Default: empty)
■Points, End
Displayed according to setting of "Start".
(Default: empty)
■Start
Device range of FX5 CPU modules (Set bit
devices in increments of 16 points and word
devices in increments of 4 points.)
(Default: empty)
7 PARAMETER SETTINGS
7.3 Basic Settings
7
93