List Of Parameter Numbers - Mitsubishi Electric MELSEC iQ-F FX5 Series User Manual

10.6

List of Parameter Numbers

The following table lists the parameter numbers displayed in "Module Diagnostics".
If there is an error in the parameter settings and the parameter number is displayed, the corresponding parameter can be
identified.
It is displayed in "Detailed information" in the [Error Information] tab in the "Module Diagnostics" window of the FX5-CCLGN-
MS. ( Page 141 Error Information)
Item
Required Settings Station Type
Network No.
Parameter Setting Method
Station No./IP Address
Setting
Basic Settings Refresh Settings
Network Topology
Communication Period
Setting
Connection Device Information
Slave Station Setting
Application Settings Supplementary Cyclic
Settings
Transient Transmission Group No.
Parameter Name
Module Operation Mode
Security
Station Type
Network No.
Setting Method of Basic/Application Settings
Setting Method of Station No./IP Address Setting Method
Station No. Station No.
IP Address IP Address
Subnet Mask
Default Gateway
Refresh Settings
Network Topology
Basic Period Setting Setting in Units of 1s
Communication Period Interval Setting (Do Not
Set it in Units of 1s)
Communication Period Interval Setting (Set it in
Units of 1s)
Cyclic Transmission Time
Transient Transmission Time
Multiple Period Setting Normal-Speed
Low-Speed
Authentication Class Setting
Disconnection Detection Setting
Station-based Block Data Assurance
I/O Maintenance Output Hold/Clear Setting during CPU STOP
Settings
Data Link Error Station Setting
Output Mode upon CPU Error
Transient Transmission Group No.
Parameter Name
Module Operation Mode
IP Filter Settings IP Filter
IP Filter Settings
Parameter No.
7100H
7100H
7100H
7100H
7100H
A012H
A012H
A013H
7401H
A100H
A100H
A100H
A100H
A100H
A100H
A100H
A100H
A100H
A100H
A100H
A110H
A110H
7101H
A010H
7310H
7100H
A03AH
Deny/Allow A03AH
IP Address A03AH
Range Setting A03AH
IP Address Excluded A03AH
from Range
10 TROUBLESHOOTING
10.6 List of Parameter Numbers
10
179